Oracle12cDataGuard出现GAP增量恢复的处理方法
周末不忘写一篇文档！
DG出现故障基本上有两个方法，一个是全量备份恢复，一个是增量备份恢复，这里我们测试增量备份恢复方法。
成都创新互联专注于石龙网站建设服务及定制，我们拥有丰富的企业做网站经验。 热诚为您提供石龙营销型网站建设，石龙网站制作、石龙网页设计、石龙网站官网定制、成都小程序开发服务，打造石龙网络公司原创品牌,更为您提供石龙网站排名全网营销落地服务。
一、环境描述
Oracle 12c ASM
RHEL 7.0
单实例到单实例的DataGuard二、问题描述
出现GAP
SQL> select * from v$archive_gap;
THREAD# LOW_SEQUENCE# HIGH_SEQUENCE# CON_ID
---------- ------------- -------------- ----------
1 223 225 1
SQL>
SQL> select message from v$dataguard_status;
MESSAGE
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
ARC0: Archival started
ARC1: Archival started
ARC2: Archival started
ARC1: Becoming the 'no FAL' ARCH
ARC2: Becoming the heartbeat ARCH
ARC2: Becoming the active heartbeat ARCH
ARC3: Archival started
Attempt to start background Managed Standby Recovery process
MRP0: Background Managed Standby Recovery process started
Primary database is in MAXIMUM PERFORMANCE mode
RFS[1]: Assigned to RFS process (PID:3973)
MESSAGE
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
RFS[2]: Assigned to RFS process (PID:3984)
RFS[3]: Assigned to RFS process (PID:3986)
ARC3: Beginning to archive thread 1 sequence 222 (7930074-7930162)
RFS[4]: Assigned to RFS process (PID:3988)
ARC3: Completed archiving thread 1 sequence 222 (0-0)
Managed Standby Recovery starting Real Time Apply
Media Recovery Log +DATADG/arch/log_1_222_961866198_585bafa7.arc
Media Recovery Waiting for thread 1 sequence 223
Fetching gap sequence in thread 1, gap sequence 223-225
20 rows selected.
SQL>
SQL> select name,value from v$dataguard_stats;
NAME VALUE
-------------------------------- ----------------------------------------------------------------
transport lag +00 00:07:57
apply lag
apply finish time
estimated startup time 16
SQL> 三、处理过程
1、备库执行，查看最新scn，取最小值
SQL> col current_scn for 999999999
SQL> select current_scn from v$database;
CURRENT_SCN
-----------
7930161
SQL> select min(f.checkpoint_change#) from v$datafile_header f, v$datafile d where f.file# =d.file# and d.enabled != 'READ ONLY' ;
MIN(F.CHECKPOINT_CHANGE#)
-------------------------
2.主库执行
--查看是否有新创建的数据文件
SQL> select FILE#,to_char(CREATION_TIME,'yyyy-mm-dd hh34:mi:ss') CREATION_TIME,STATUS,LAST_TIME,name from v$datafile where CREATION_CHANGE#>7930161;
no rows selected
3.主库增量备份数据文件和控制文件
run
{
allocate channel t1 type disk;
allocate channel t2 type disk;
BACKUP as compressed backupset INCREMENTAL FROM SCN 7930161 DATABASE FORMAT '/home/oracle/dg_%U' tag 'FORSTANDBY';
release channel t1;
release channel t2;
}
ALTER DATABASE CREATE standby controlfile AS '/home/oracle/standby_20171217.ctl';
RMAN>
RMAN> run
2> {
3> allocate channel t1 type disk;
4> allocate channel t2 type disk;
5> BACKUP as compressed backupset INCREMENTAL FROM SCN 7930161 DATABASE FORMAT '/home/oracle/dg_%U' tag 'FORSTANDBY';
6> release channel t1;
7> release channel t2;
8> }
allocated channel: t1
channel t1: SID=76 device type=DISK
allocated channel: t2
channel t2: SID=56 device type=DISK
Starting backup at 17-DEC-2017 08:07:54
channel t1: starting compressed full datafile backup set
channel t1: specifying datafile(s) in backup set
input datafile file number=00001 name=+DATADG/ORCL/DATAFILE/system.258.954622821
input datafile file number=00006 name=+DATADG/ORCL/DATAFILE/users.259.954622957
channel t1: starting piece 1 at 17-DEC-2017 08:07:55
channel t2: starting compressed full datafile backup set
channel t2: specifying datafile(s) in backup set
input datafile file number=00003 name=+DATADG/ORCL/DATAFILE/sysaux.257.954622639
input datafile file number=00004 name=+DATADG/ORCL/DATAFILE/undotbs1.260.954622959
channel t2: starting piece 1 at 17-DEC-2017 08:07:55
channel t2: finished piece 1 at 17-DEC-2017 08:08:10
piece handle=/home/oracle/dg_0msmb3ur_1_1 tag=FORSTANDBY comment=NONE
channel t2: backup set complete, elapsed time: 00:00:15
channel t2: starting compressed full datafile backup set
channel t2: specifying datafile(s) in backup set
including current control file in backup set
channel t2: starting piece 1 at 17-DEC-2017 08:08:13
channel t2: finished piece 1 at 17-DEC-2017 08:08:14
piece handle=/home/oracle/dg_0nsmb3va_1_1 tag=FORSTANDBY comment=NONE
channel t2: backup set complete, elapsed time: 00:00:01
channel t1: finished piece 1 at 17-DEC-2017 08:08:38
piece handle=/home/oracle/dg_0lsmb3ur_1_1 tag=FORSTANDBY comment=NONE
channel t1: backup set complete, elapsed time: 00:00:43
Finished backup at 17-DEC-2017 08:08:38
released channel: t1
released channel: t2
RMAN> ALTER DATABASE CREATE standby controlfile AS '/home/oracle/standby_20171217.ctl';
Statement processed
RMAN> exit
Recovery Manager complete.
$ls
dg_0lsmb3ur_1_1 dg_0msmb3ur_1_1 dg_0nsmb3va_1_1 standby_20171217.ctl
$scp /home/oracle/* oracle@192.168.1.112:/home/oracle
dg_0lsmb3ur_1_1 100% 472KB 472.0KB/s 00:00
dg_0msmb3ur_1_1 100% 1640KB 1.6MB/s 00:00
dg_0nsmb3va_1_1 100% 1136KB 1.1MB/s 00:00
standby_20171217.ctl 100% 11MB 11.1MB/s 00:00
$
4.备库执行恢复数据库
sqlplus / as sysdba
startup mount;
RMAN> backup current controlfile format '/home/oracle/standby_1217.ctl';
Starting backup at 17-DEC-2017 08:52:45
using channel ORA_DISK_1
channel ORA_DISK_1: starting full datafile backup set
channel ORA_DISK_1: specifying datafile(s) in backup set
including current control file in backup set
channel ORA_DISK_1: starting piece 1 at 17-DEC-2017 08:52:46
channel ORA_DISK_1: finished piece 1 at 17-DEC-2017 08:52:47
piece handle=/home/oracle/standby_1217.ctl tag=TAG20171217T085245 comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:00:01
Finished backup at 17-DEC-2017 08:52:47
RMAN> catalog start with '/home/oracle';
searching for all files that match the pattern /home/oracle
....省略...........
报错
RMAN> recover database noredo;
Starting recover at 17-DEC-2017 08:57:40
using channel ORA_DISK_1
channel ORA_DISK_1: starting incremental datafile backup set restore
channel ORA_DISK_1: specifying datafile(s) to restore from backup set
destination for restore of datafile 00001: +DATADG/ORCLDG/DATAFILE/system.258.954626559
destination for restore of datafile 00006: +DATADG/ORCLDG/DATAFILE/users.261.954626717
channel ORA_DISK_1: reading from backup piece /home/oracle/dg_0lsmb3ur_1_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 12/17/2017 08:57:41
ORA-19870: error while restoring backup piece /home/oracle/dg_0lsmb3ur_1_1
ORA-19573: cannot obtain exclusive enqueue for datafile 1
解决
--备库取消实时同步进程
SQL> alter database recover managed standby database cancel;
Database altered.
重新执行恢复
RMAN> recover database noredo;
Starting recover at 17-DEC-2017 08:58:23
using channel ORA_DISK_1
channel ORA_DISK_1: starting incremental datafile backup set restore
channel ORA_DISK_1: specifying datafile(s) to restore from backup set
destination for restore of datafile 00001: +DATADG/ORCLDG/DATAFILE/system.258.954626559
destination for restore of datafile 00006: +DATADG/ORCLDG/DATAFILE/users.261.954626717
channel ORA_DISK_1: reading from backup piece /home/oracle/dg_0lsmb3ur_1_1
channel ORA_DISK_1: piece handle=/home/oracle/dg_0lsmb3ur_1_1 tag=FORSTANDBY
channel ORA_DISK_1: restored backup piece 1
channel ORA_DISK_1: restore complete, elapsed time: 00:00:01
channel ORA_DISK_1: starting incremental datafile backup set restore
channel ORA_DISK_1: specifying datafile(s) to restore from backup set
destination for restore of datafile 00003: +DATADG/ORCLDG/DATAFILE/sysaux.259.954626615
destination for restore of datafile 00004: +DATADG/ORCLDG/DATAFILE/undotbs1.260.954626701
channel ORA_DISK_1: reading from backup piece /home/oracle/dg_0msmb3ur_1_1
channel ORA_DISK_1: piece handle=/home/oracle/dg_0msmb3ur_1_1 tag=FORSTANDBY
channel ORA_DISK_1: restored backup piece 1
channel ORA_DISK_1: restore complete, elapsed time: 00:00:01
Finished recover at 17-DEC-2017 08:58:26
RMAN>
备库恢复完数据库后，备库使用当前的控制文件收集备库的数据文件路径信息
SQL> col name for a50
SQL> select file#,name from v$datafile;
FILE# NAME
---------- --------------------------------------------------
1 +DATADG/ORCLDG/DATAFILE/system.258.954626559
3 +DATADG/ORCLDG/DATAFILE/sysaux.259.954626615
4 +DATADG/ORCLDG/DATAFILE/undotbs1.260.954626701
6 +DATADG/ORCLDG/DATAFILE/users.261.954626717
SQL>
恢复控制文件
RMAN> shutdown immediate;
database dismounted
Oracle instance shut down
RMAN> exit
Recovery Manager complete.
$ls
dg_0lsmb3ur_1_1 dg_0msmb3ur_1_1 dg_0nsmb3va_1_1 standby_1217.ctl standby_20171217.ctl
$ls -l
total 25056
-rw-r----- 1 oracle oinstall 483328 Dec 17 08:09 dg_0lsmb3ur_1_1
-rw-r----- 1 oracle oinstall 1679360 Dec 17 08:09 dg_0msmb3ur_1_1
-rw-r----- 1 oracle oinstall 1163264 Dec 17 08:09 dg_0nsmb3va_1_1
-rw-r----- 1 oracle asmadmin 10682368 Dec 17 08:52 standby_1217.ctl
-rw-r----- 1 oracle oinstall 11649024 Dec 17 08:09 standby_20171217.ctl
$rman target /
Recovery Manager: Release 12.1.0.2.0 - Production on Sun Dec 17 09:06:25 2017
Copyright (c) 1982, 2014, Oracle and/or its affiliates. All rights reserved.
connected to target database (not started)
RMAN> startup nomount;
Oracle instance started
Total System Global Area 1241513984 bytes
Fixed Size 2923872 bytes
Variable Size 452985504 bytes
Database Buffers 771751936 bytes
Redo Buffers 13852672 bytes
--恢复控制文件
RMAN> restore controlfile from '/home/oracle/standby_20171217.ctl';
Starting restore at 17-DEC-2017 09:07:06
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=1 device type=DISK
channel ORA_DISK_1: copied control file copy
output file name=+DATADG/orcldg/standby.ctl
Finished restore at 17-DEC-2017 09:07:07
--加载控制文件
RMAN> alter database mount;
Statement processed
released channel: ORA_DISK_1
RMAN>
--注册数据文件
RMAN> catalog start with '+DATADG/ORCLDG/DATAFILE/';
Starting implicit crosscheck backup at 17-DEC-2017 09:09:16
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=46 device type=DISK
Crosschecked 11 objects
Finished implicit crosscheck backup at 17-DEC-2017 09:09:17
Starting implicit crosscheck copy at 17-DEC-2017 09:09:17
using channel ORA_DISK_1
Finished implicit crosscheck copy at 17-DEC-2017 09:09:17
searching for all files in the recovery area
cataloging files...
cataloging done
List of Cataloged Files
=======================
...省略.....
File Name: +DATADG/ORCLDG/ARCHIVELOG/2017_11_29/thread_1_seq_273.314.961336961
File Name: +DATADG/ORCLDG/DATAFILE/system.258.954626559
File Name: +DATADG/ORCLDG/DATAFILE/sysaux.259.954626615
File Name: +DATADG/ORCLDG/DATAFILE/undotbs1.260.954626701
File Name: +DATADG/ORCLDG/DATAFILE/users.261.954626717
searching for all files that match the pattern +DATADG/ORCLDG/DATAFILE/
no files found to be unknown to the database
RMAN> SWITCH DATABASE TO COPY;
datafile 1 switched to datafile copy "+DATADG/ORCLDG/DATAFILE/system.258.954626559"
datafile 3 switched to datafile copy "+DATADG/ORCLDG/DATAFILE/sysaux.259.954626615"
datafile 4 switched to datafile copy "+DATADG/ORCLDG/DATAFILE/undotbs1.260.954626701"
datafile 6 switched to datafile copy "+DATADG/ORCLDG/DATAFILE/users.261.954626717"
RMAN>
RMAN> alter database recover managed standby database using current logfile disconnect from session;
Statement processed
日志有报错
Errors in file /u01/app/oracle/diag/rdbms/orcldg/orcldg/trace/orcldg_ora_22731.trc:
ORA-00313: open failed for members of log group 14 of thread 1
ORA-00312: online log 14 thread 1: '+DATADG/ORCL/ONLINELOG/group_14.270.954625683'
ORA-17503: ksfdopn:2 Failed to open file +DATADG/ORCL/ONLINELOG/group_14.270.954625683
ORA-15173: entry 'ORCL' does not exist in directory '/'
2017-12-17 11:45:52.647000 +08:00
Completed: alter database clear logfile group 14
2017-12-17 11:46:02.748000 +08:00
alter database clear logfile group 15
处理过程
SQL> select group# from v$standby_log;
GROUP#
----------
11
12
13
14
--初始化standby redo log
SQL> alter database recover managed standby database cancel;
Database altered.
SQL> alter database clear logfile group 11;
Database altered.
SQL> alter database clear logfile group 12;
Database altered.
SQL> alter database clear logfile group 13;
Database altered.
SQL> alter database clear logfile group 14;
Database altered.
--启动实时应用
SQL> alter database recover managed standby database using current logfile disconnect from session;
Database altered.
5.验证
DGMGRL> show configuration;
Configuration - dg_config
Protection Mode: MaxPerformance
Members:
orcl - Primary database
orcldg - Physical standby database
Fast-Start Failover: DISABLED
Configuration Status:
SUCCESS (status updated 57 seconds ago)
DGMGRL> 本文题目：Oracle12cDataGuard出现GAP增量恢复的处理方法
分享地址：http://azwzsj.com/article/gopdje.html
