MySQLCHAR和VARCHAR数据类型介绍
CHAR类型是固定长度的，长度范围为0到255。如果存储的值不覆盖字段长度，存储数据的其他的部分会在值的右边自动添加空格。
VARCHAR字段中的值是可变长度的字符串，长度范围为0到65535。VARCHAR字段的值以1字节或2字节的长度前缀加上数据的方式存储。长度前缀指示了字段存储的字节数，如果一个字段存储的值不超过255字节，它使用一个长度前缀，如果字段存储的值超过了255字节，它使用两个长度前缀。
如果没有启用严格SQL模式，分配给CHAR或VARCHAR字段超过字段最大长度的值，这个值会被截断保存到数据库中，并会产生一个警告。对于VARCHAR字段来说，不管使用什么样的SQL模式，分配给VARCHAR字段超过字段最大长度的值，在值插入前，超过字段最大长度的部分会被截断，并会产生一个警告。对于CHAR字段来说，不管使用什么样的SQL模式，超过字段最大长度的部分会被截断，并隐式插入到数据库中。
--测试①
MariaDB [test]> show variables like '%sql%mode%';
+---------------+--------------------------------------------+
| Variable_name | Value |
+---------------+--------------------------------------------+
| sql_mode | NO_AUTO_CREATE_USER,NO_ENGINE_SUBSTITUTION |
+---------------+--------------------------------------------+
1 row in set (0.26 sec)
MariaDB [test]> drop table vc;
Query OK, 0 rows affected (0.04 sec)
MariaDB [test]> CREATE TABLE vc (v VARCHAR(4), c CHAR(4));
Query OK, 0 rows affected (0.54 sec)
MariaDB [test]> INSERT INTO vc VALUES ('ab ', 'ab ');
Query OK, 1 row affected (0.14 sec)
--查看插入的数据中是否保留空格
MariaDB [test]> SELECT CONCAT('(', v, ')'), CONCAT('(', c, ')') FROM vc;
+---------------------+---------------------+
| CONCAT('(', v, ')') | CONCAT('(', c, ')') |
+---------------------+---------------------+
| (ab ) | (ab) |
+---------------------+---------------------+
1 row in set (0.00 sec)
MariaDB [test]> select length(v),length(c) from vc;
+-----------+-----------+
| length(v) | length(c) |
+-----------+-----------+
| 4 | 2 |
+-----------+-----------+
1 row in set (0.00 sec)
--插入超过字段最大值的数据到表中
MariaDB [test]> insert into vc values('abcdefg','abcedeg');
Query OK, 1 row affected, 2 warnings (0.03 sec)
MariaDB [test]> show warnings;
+---------+------+----------------------------------------+
| Level | Code | Message |
+---------+------+----------------------------------------+
| Warning | 1265 | Data truncated for column 'v' at row 1 |
| Warning | 1265 | Data truncated for column 'c' at row 1 |
+---------+------+----------------------------------------+
2 rows in set (0.00 sec)
MariaDB [test]> select * from vc;
+------+------+
| v | c |
+------+------+
| ab | ab |
| abcd | abce |
+------+------+
2 rows in set (0.00 sec)
--测试②
MariaDB [test]> CREATE TABLE names (myname CHAR(10));
Query OK, 0 rows affected (0.13 sec)
MariaDB [test]> INSERT INTO names VALUES ('Monty');
Query OK, 1 row affected (0.00 sec)
--查看表中数据在WHERE条件中使用=的条件中带空格的执行情况
MariaDB [test]> SELECT myname = 'Monty', myname = 'Monty ' FROM names;
+------------------+--------------------+
| myname = 'Monty' | myname = 'Monty ' |
+------------------+--------------------+
| 1 | 1 |
+------------------+--------------------+
1 row in set (0.00 sec)
MariaDB [test]> SELECT * FROM names;
+--------+
| myname |
+--------+
| Monty |
+--------+
1 row in set (0.00 sec)
MariaDB [test]> select length(myname) from names;
+----------------+
| length(myname) |
+----------------+
| 5 |
+----------------+
1 row in set (0.00 sec)
MariaDB [test]> SELECT * FROM names where myname = 'Monty';
+--------+
| myname |
+--------+
| Monty |
+--------+
1 row in set (0.00 sec)
MariaDB [test]> SELECT * FROM names where myname = 'Monty ';
+--------+
| myname |
+--------+
| Monty |
+--------+
1 row in set (0.00 sec)
MariaDB [test]> SELECT * FROM names where myname = 'Monty ';
+--------+
| myname |
+--------+
| Monty |
+--------+
1 row in set (0.00 sec)
MariaDB [test]> SELECT * FROM names where myname = 'Monty ';
+--------+
| myname |
+--------+
| Monty |
+--------+
1 row in set (0.00 sec)
MariaDB [test]> SELECT * FROM names where myname = 'Monty ';
+--------+
| myname |
+--------+
| Monty |
+--------+
1 row in set (0.00 sec)
MariaDB [test]> SELECT * FROM names where myname = 'Monty ';
+--------+
| myname |
+--------+
| Monty |
+--------+
1 row in set (0.00 sec)
MariaDB [test]> SELECT * FROM names where myname = 'Monty ';
+--------+
| myname |
+--------+
| Monty |
+--------+
1 row in set (0.00 sec)
MariaDB [test]> SELECT * FROM names where myname = 'Monty ';
+--------+
| myname |
+--------+
| Monty |
+--------+
1 row in set (0.00 sec)
--查看表中的数据在like条件下的执行情况
MariaDB [test]> SELECT myname LIKE 'Monty', myname LIKE 'Monty ' FROM names;
+---------------------+-----------------------+
| myname LIKE 'Monty' | myname LIKE 'Monty ' |
+---------------------+-----------------------+
| 1 | 0 |
+---------------------+-----------------------+
1 row in set (0.00 sec)
MariaDB [test]> SELECT * FROM names where myname like '%Monty%';
+--------+
| myname |
+--------+
| Monty |
+--------+
1 row in set (0.00 sec)
MariaDB [test]> SELECT * FROM names where myname like 'Monty%';
+--------+
| myname |
+--------+
| Monty |
+--------+
1 row in set (0.00 sec)
MariaDB [test]> SELECT * FROM names where myname like 'Monty %';
Empty set (0.00 sec)
MariaDB [test]> SELECT * FROM names where myname like 'Monty %';
Empty set (0.00 sec)
MariaDB [test]> SELECT * FROM names where myname like 'Monty %';
Empty set (0.00 sec)
网站标题：MySQLCHAR和VARCHAR数据类型介绍
文章出自：http://azwzsj.com/article/gjdohj.html
VARCHAR字段中的值是可变长度的字符串，长度范围为0到65535。VARCHAR字段的值以1字节或2字节的长度前缀加上数据的方式存储。长度前缀指示了字段存储的字节数，如果一个字段存储的值不超过255字节，它使用一个长度前缀，如果字段存储的值超过了255字节，它使用两个长度前缀。
如果没有启用严格SQL模式，分配给CHAR或VARCHAR字段超过字段最大长度的值，这个值会被截断保存到数据库中，并会产生一个警告。对于VARCHAR字段来说，不管使用什么样的SQL模式，分配给VARCHAR字段超过字段最大长度的值，在值插入前，超过字段最大长度的部分会被截断，并会产生一个警告。对于CHAR字段来说，不管使用什么样的SQL模式，超过字段最大长度的部分会被截断，并隐式插入到数据库中。
--测试①
MariaDB [test]> show variables like '%sql%mode%';
+---------------+--------------------------------------------+
| Variable_name | Value |
+---------------+--------------------------------------------+
| sql_mode | NO_AUTO_CREATE_USER,NO_ENGINE_SUBSTITUTION |
+---------------+--------------------------------------------+
1 row in set (0.26 sec)
MariaDB [test]> drop table vc;
Query OK, 0 rows affected (0.04 sec)
MariaDB [test]> CREATE TABLE vc (v VARCHAR(4), c CHAR(4));
Query OK, 0 rows affected (0.54 sec)
MariaDB [test]> INSERT INTO vc VALUES ('ab ', 'ab ');
Query OK, 1 row affected (0.14 sec)
--查看插入的数据中是否保留空格
MariaDB [test]> SELECT CONCAT('(', v, ')'), CONCAT('(', c, ')') FROM vc;
+---------------------+---------------------+
| CONCAT('(', v, ')') | CONCAT('(', c, ')') |
+---------------------+---------------------+
| (ab ) | (ab) |
+---------------------+---------------------+
1 row in set (0.00 sec)
MariaDB [test]> select length(v),length(c) from vc;
+-----------+-----------+
| length(v) | length(c) |
+-----------+-----------+
| 4 | 2 |
+-----------+-----------+
1 row in set (0.00 sec)
--插入超过字段最大值的数据到表中
MariaDB [test]> insert into vc values('abcdefg','abcedeg');
Query OK, 1 row affected, 2 warnings (0.03 sec)
MariaDB [test]> show warnings;
+---------+------+----------------------------------------+
| Level | Code | Message |
+---------+------+----------------------------------------+
| Warning | 1265 | Data truncated for column 'v' at row 1 |
| Warning | 1265 | Data truncated for column 'c' at row 1 |
+---------+------+----------------------------------------+
2 rows in set (0.00 sec)
MariaDB [test]> select * from vc;
+------+------+
| v | c |
+------+------+
| ab | ab |
| abcd | abce |
+------+------+
2 rows in set (0.00 sec)
MariaDB [test]> CREATE TABLE names (myname CHAR(10));
Query OK, 0 rows affected (0.13 sec)
MariaDB [test]> INSERT INTO names VALUES ('Monty');
Query OK, 1 row affected (0.00 sec)
--查看表中数据在WHERE条件中使用=的条件中带空格的执行情况
MariaDB [test]> SELECT myname = 'Monty', myname = 'Monty ' FROM names;
+------------------+--------------------+
| myname = 'Monty' | myname = 'Monty ' |
+------------------+--------------------+
| 1 | 1 |
+------------------+--------------------+
1 row in set (0.00 sec)
MariaDB [test]> SELECT * FROM names;
+--------+
| myname |
+--------+
| Monty |
+--------+
1 row in set (0.00 sec)
MariaDB [test]> select length(myname) from names;
+----------------+
| length(myname) |
+----------------+
| 5 |
+----------------+
1 row in set (0.00 sec)
MariaDB [test]> SELECT * FROM names where myname = 'Monty';
+--------+
| myname |
+--------+
| Monty |
+--------+
1 row in set (0.00 sec)
MariaDB [test]> SELECT * FROM names where myname = 'Monty ';
+--------+
| myname |
+--------+
| Monty |
+--------+
1 row in set (0.00 sec)
MariaDB [test]> SELECT * FROM names where myname = 'Monty ';
+--------+
| myname |
+--------+
| Monty |
+--------+
1 row in set (0.00 sec)
MariaDB [test]> SELECT * FROM names where myname = 'Monty ';
+--------+
| myname |
+--------+
| Monty |
+--------+
1 row in set (0.00 sec)
MariaDB [test]> SELECT * FROM names where myname = 'Monty ';
+--------+
| myname |
+--------+
| Monty |
+--------+
1 row in set (0.00 sec)
MariaDB [test]> SELECT * FROM names where myname = 'Monty ';
+--------+
| myname |
+--------+
| Monty |
+--------+
1 row in set (0.00 sec)
MariaDB [test]> SELECT * FROM names where myname = 'Monty ';
+--------+
| myname |
+--------+
| Monty |
+--------+
1 row in set (0.00 sec)
MariaDB [test]> SELECT * FROM names where myname = 'Monty ';
+--------+
| myname |
+--------+
| Monty |
+--------+
1 row in set (0.00 sec)
--查看表中的数据在like条件下的执行情况
MariaDB [test]> SELECT myname LIKE 'Monty', myname LIKE 'Monty ' FROM names;
+---------------------+-----------------------+
| myname LIKE 'Monty' | myname LIKE 'Monty ' |
+---------------------+-----------------------+
| 1 | 0 |
+---------------------+-----------------------+
1 row in set (0.00 sec)
MariaDB [test]> SELECT * FROM names where myname like '%Monty%';
+--------+
| myname |
+--------+
| Monty |
+--------+
1 row in set (0.00 sec)
MariaDB [test]> SELECT * FROM names where myname like 'Monty%';
+--------+
| myname |
+--------+
| Monty |
+--------+
1 row in set (0.00 sec)
MariaDB [test]> SELECT * FROM names where myname like 'Monty %';
Empty set (0.00 sec)
MariaDB [test]> SELECT * FROM names where myname like 'Monty %';
Empty set (0.00 sec)
MariaDB [test]> SELECT * FROM names where myname like 'Monty %';
Empty set (0.00 sec)
网站标题：MySQLCHAR和VARCHAR数据类型介绍
文章出自：http://azwzsj.com/article/gjdohj.html
