阿坝州网站建设公司

PostgreSQLpg_ctlstart超时分析

一、问题
pg_ctl start启动时报错退出：pg_ctl：server did not start in time。超时时间是多少？从什么时候到哪个阶段算超时？

成都创新互联公司专注于企业营销型网站、网站重做改版、湛河网站定制设计、自适应品牌网站建设、H5开发、商城网站建设、集团公司官网建设、成都外贸网站制作、高端网站制作、响应式网页设计等建站业务，价格优惠性价比高，为湛河等各大城市提供网站开发制作服务。

二、分析：该信息打印位置，从后面代码段do_start函数中可以看出
1、pg_ctl start调用start_postmaster启动PG的主进程后，每隔0.1ms检查一次postmaster.pid文件，是否已写入ready/standby
2、总共会检查600次，即从启动主进程后，最多等待60s，如果没有写入ready/standby则打印上述日志并退出
3、默认等待时间是60s，如果pg_ctl start -t指定等待时间，则等待时间为该指定时间

三、什么时候postmaster.pid文件写入ready/standby
1、如果是主机不管有没有设置hot standby
    1）当startup进程恢复完成退出时，调用proc_exit函数向主进程发送SIGCHLD信号并退出
    2）主进程接收到信号后，signal处理函数reaper调用AddToDataDirLockFile向postmaster.pid文件写入ready
2、如果是备机即data目录下有recovery.cnf文件，且设置了hot standby，在实际恢复前没有到达一致性位置
    1）startup进程向主进程发送PMSIGNAL_RECOVERY_STARTED信号，主进程调用信号处理函数sigusr1_handler，将pmState=PM_RECOVERY
    2）每次读取下一个xlog前都会调用CheckRecoveryConsistency函数进行一致性检查：
        2.1 进入一致性状态，starup进程向主进程发送PMSIGNAL_BEGIN_HOT_STANDBY信号，主进程接收到信号后调用sigusr1_handler->AddToDataDirLockFile向postmaster.pid文件写入ready
3、如果是备机即data目录下有recovery.cnf文件，且设置了hot standby，在实际恢复前没有到达一致性位置
    1）startup进程向主进程发送PMSIGNAL_RECOVERY_STARTED信号，主进程调用信号处理函数sigusr1_handler，将pmState=PM_RECOVERY
    2）每次读取下一个xlog前都会调用CheckRecoveryConsistency函数进行一致性检查。如果没有进入一致性状态
    3）本地日志恢复完成，切换日志源时同样调用CheckRecoveryConsistency函数进行一致性检查
        3.1 进入一致性状态，starup进程向主进程发送PMSIGNAL_BEGIN_HOT_STANDBY信号，主进程接收到信号后调用sigusr1_handler->AddToDataDirLockFile向postmaster.pid文件写入ready
4、如果是备机即data目录下有recovery.cnf文件，且设置了hot standby，在实际恢复前到达一致性位置
    1）startup进程向主进程发送PMSIGNAL_RECOVERY_STARTED信号，主进程调用信号处理函数sigusr1_handler，将pmState=PM_RECOVERY
    2）CheckRecoveryConsistency函数进行一致性检查，向主进程发送PMSIGNAL_BEGIN_HOT_STANDBY信号，主进程接收到信号后调用sigusr1_handler->AddToDataDirLockFile向postmaster.pid文件写入ready
5、如果是备机即data目录下有recovery.cnf文件，没有设置hot standby
    1）startup进程向主进程发送PMSIGNAL_RECOVERY_STARTED信号
    2）主进程接收到信号后，向postmaster.将pmState=PM_RECOVERY

四、代码分析
1、pg_ctl start流程

do_start->
    pm_pid = start_postmaster();
    if (do_wait){
        print_msg(_("waiting for server to start..."));
        switch (wait_for_postmaster(pm_pid, false)){
            case POSTMASTER_READY:
                print_msg(_(" done\n"));
                print_msg(_("server started\n"));
                break;
            case POSTMASTER_STILL_STARTING:
                print_msg(_(" stopped waiting\n"));
                write_stderr(_("%s: server did not start in time\n"), progname);
                exit(1);
                break;
            case POSTMASTER_FAILED:
                print_msg(_(" stopped waiting\n"));
                write_stderr(_("%s: could not start server\n" "Examine the log output.\n"), progname);
                exit(1);
                break;
        }
    }else
        print_msg(_("server starting\n"));
wait_for_postmaster->
    for (i = 0; i < wait_seconds * WAITS_PER_SEC; i++){
        if ((optlines = readfile(pid_file, &numlines)) != NULL && numlines >= LOCK_FILE_LINE_PM_STATUS){
            pmpid = atol(optlines[LOCK_FILE_LINE_PID - 1]);
            pmstart = atol(optlines[LOCK_FILE_LINE_START_TIME - 1]);
            if (pmstart >= start_time - 2 && pmpid == pm_pid){
                char       *pmstatus = optlines[LOCK_FILE_LINE_PM_STATUS - 1];
                if (strcmp(pmstatus, PM_STATUS_READY) == 0 || strcmp(pmstatus, PM_STATUS_STANDBY) == 0){
                    /* postmaster is done starting up */
                    free_readfile(optlines);
                    return POSTMASTER_READY;
                }
            }
        }
        free_readfile(optlines);
        if (waitpid((pid_t) pm_pid, &exitstatus, WNOHANG) == (pid_t) pm_pid)
            return POSTMASTER_FAILED;
        pg_usleep(USEC_PER_SEC / WAITS_PER_SEC);
    }
    /* out of patience; report that postmaster is still starting up */
    return POSTMASTER_STILL_STARTING;

2、server主进程及信号处理函数

PostmasterMain->
    pqsignal_no_restart(SIGUSR1, sigusr1_handler);  /* message from child process */
    pqsignal_no_restart(SIGCHLD, reaper);   /* handle child termination */
    ...
    StartupXLOG();
    ...
    proc_exit(0);//exit函数向主进程发送SIGCHLD信号
reaper->//进程终止或者停止的信号
    AddToDataDirLockFile(LOCK_FILE_LINE_PM_STATUS, PM_STATUS_READY);
postmaster进程接收信号：
sigusr1_handler->
    if (CheckPostmasterSignal(PMSIGNAL_RECOVERY_STARTED) &&
        pmState == PM_STARTUP && Shutdown == NoShutdown){
        CheckpointerPID = StartCheckpointer();
        BgWriterPID = StartBackgroundWriter();
        if (XLogArchivingAlways())
            PgArchPID = pgarch_start();
        //hot_standby在postgresql.conf文件中配置TRUE
        //表示在恢复的时候允许连接
        if (!EnableHotStandby){
            //将standby写入postmaster.pid文件，表示up但不允许连接
            AddToDataDirLockFile(LOCK_FILE_LINE_PM_STATUS, PM_STATUS_STANDBY);
        }
        pmState = PM_RECOVERY;
    }
    if (CheckPostmasterSignal(PMSIGNAL_BEGIN_HOT_STANDBY) &&
        pmState == PM_RECOVERY && Shutdown == NoShutdown){
        PgStatPID = pgstat_start();
        //将ready写入postmaster.pid文件，允许连接
        AddToDataDirLockFile(LOCK_FILE_LINE_PM_STATUS, PM_STATUS_READY);
        pmState = PM_HOT_STANDBY;
    }
    ...

3、Startup进程

StartupXLOG->
    ReadCheckpointRecord
    if (ArchiveRecoveryRequested && IsUnderPostmaster){//有recovery.conf文件则ArchiveRecoveryRequested为TRUE
        //有recovery.conf文件则ArchiveRecoveryRequested为TRUE
        PublishStartupProcessInformation();
        SetForwardFsyncRequests();
        //向master进程发送PMSIGNAL_RECOVERY_STARTED信号
        SendPostmasterSignal(PMSIGNAL_RECOVERY_STARTED);
        bgwriterLaunched = true;
    }
    CheckRecoveryConsistency();-->...
    |-- if (standbyState == STANDBY_SNAPSHOT_READY && !LocalHotStandbyActive &&
    |       reachedConsistency && IsUnderPostmaster){
    |       SpinLockAcquire(&XLogCtl->info_lck);
    |       XLogCtl->SharedHotStandbyActive = true;
    |       SpinLockRelease(&XLogCtl->info_lck);
    |       LocalHotStandbyActive = true;
    |       SendPostmasterSignal(PMSIGNAL_BEGIN_HOT_STANDBY);
    |-- }
    ...
    回放一个record后，每次读取下一个record前都会调用CheckRecoveryConsistency

本文题目：PostgreSQLpg_ctlstart超时分析
浏览路径：http://azwzsj.com/article/gipgie.html

其他资讯