OracleRAC之环境准备的示例分析-创新互联
这篇文章给大家分享的是有关Oracle RAC之环境准备的示例分析的内容。小编觉得挺实用的，因此分享给大家做个参考，一起跟随小编过来看看吧。
本次安装选择VMmare Workstation 10.0.1 ，创建四台虚拟机。如下：
Openfiler （openfileresa-2.99.1-x86_64）
| 机器名 | IP地址 | ||
| openfiler.localdomain.com | 192.168.199.219 | ||
RAC节点 （OracleLinux-R6-U4-Server-x86_64）
| 机器名 | Public-IP | Private-IP | VIP | |||
| 11grac1 | 192.168.199.10 | 192.168.10.10 | 192.168.199.20 | |||
| 11grac2 | 192.168.199.11 | 192.168.10.11 | 192.168.199.21 | |||
| 11grac3 | 192.168.199.12 | 192.168.10.12 | 192.168.199.22 | |||
三台机器都配置/etc/hosts，内容如下
2.三台机器都关闭防火墙
chkconfig iptables off service iptables stop3.关闭SeLinux
vi /etc/sysconfig/selinux SELINUX=enforcing 改为 SELINUX=disabled4.配置DNS服务器（在11grac3服务器上）
4.1 安装rpm包
[root@localhost Packages]# rpm -ivh bind-9.8.2-0.17.rc1.0.2.el6.x86_64.rpm warning: bind-9.8.2-0.17.rc1.0.2.el6.x86_64.rpm: Header V3 RSA/SHA256 Signature, key ID ec551f03: NOKEY Preparing... ########################################### [100%] 1:bind ########################################### [100%]4.2 编辑/etc/named.conf,替换成如下内容
options { directory "/var/named"; }; zone "." IN { type hint; file "named.ca"; }; zone "localhost" IN { type master; file "named.loopback"; }; zone "0.0.127.in-addr.apra" IN { type master; file "named.localhost"; }; zone "localdomain.com" IN { type master; file "localdomain.com.zone"; };4.3 在/var/named/目录下，新建localdomain.com.zone文件，内容如下
$TTL 1D $ORIGIN localdomain.com. @ IN SOA ns.localdomain.com. admin ( 0 ; serial 1D ; refresh 1H ; retry 1W ; expire 3H ) ; minimum IN NS ns ns IN A 172.168.199.12 11grac3 IN A 192.168.199.12 11grac1 IN A 192.168.199.10 11grac2 IN A 192.168.199.11 scan-cluster IN A 192.168.199.304.4 启动DNS服务器
[root@11grac3 etc]# chkconfig named on [root@localhost named]# service named restart Stopping named: [ OK ] Starting named: [ OK ]如果发生了错误，尝试执行如下命令试试
[root@localhost named]# rndc-confgen -r /dev/urandom -a wrote key file "/etc/rndc.key"4.5 修改各服务器dns指向
[root@localhost named]# vi /etc/resolv.conf添加如下内容
search localdomain.com nameserver 192.168.199.12注意：这样设置完DNS后，网络重启后就失效啦。使用如下方法
vi /etc/sysconfig/network-scripts/ifcfg-eth0 #添加如下两行 DNS1=192.168.199.12 DOMAIN=localdomain.com重启网络，/etc/resolv.conf中将自动完成DNS的设置。
4.6 验证dns
[root@localhost named]# nslookup 11grac1 Server: 192.168.199.12 Address: 192.168.199.12#53 Name: 11grac1.localdomain.com Address: 192.168.199.10 [root@localhost named]# nslookup 11grac2 Server: 192.168.199.12 Address: 192.168.199.12#53 Name: 11grac2.localdomain.com Address: 192.168.199.11 [root@localhost named]# nslookup 11grac3 Server: 192.168.199.12 Address: 192.168.199.12#53 Name: 11grac3.localdomain.com Address: 192.168.199.12 [root@localhost named]# nslookup scan-cluster Server: 192.168.199.12 Address: 192.168.199.12#53 Name: scan-cluster.localdomain.com Address: 192.168.199.305. 建立用户、建立目录、修改参数文件等 （脚本见附件）
[root@localhost scripts]# ./1preusers.sh [root@localhost scripts]# ./2predir.sh [root@localhost scripts]# ./3prelimits.sh [root@localhost scripts]# ./4prelogin.sh [root@localhost scripts]# ./5preprofile.sh [root@localhost scripts]# ./6presysctl.sh6. 建立grid、oracle用户的无密码登录
6.1 在三台机器上都执行如下命令
[root@11grac1 scripts]# su - oracle 11grac1-> ssh-keygen -t rsa #后面都直接回车 Generating public/private rsa key pair. Enter file in which to save the key (/home/oracle/.ssh/id_rsa): Created directory '/home/oracle/.ssh'. Enter passphrase (empty for no passphrase): Enter same passphrase again: Your identification has been saved in /home/oracle/.ssh/id_rsa. Your public key has been saved in /home/oracle/.ssh/id_rsa.pub. The key fingerprint is: 31:43:2d:7e:30:bb:c9:d9:d9:8a:01:a2:51:bc:8b:2d oracle@11grac1.localdomain.com The key's randomart p_w_picpath is: +--[ RSA 2048]----+ | . .. | | o .+ . | | . . .+= | | . o . o+. | | = o oS* o | | E o * o . | | . o . | | . . | | | +-----------------+6.2 在三台机器上执行如下命令
11grac1-> ssh-copy-id -i .ssh/id_rsa.pub 11grac1 The authenticity of host '11grac1 (192.168.199.10)' can't be established. RSA key fingerprint is cc:d0:c3:de:37:33:a7:cb:91:40:c5:5f:18:07:06:9f. Are you sure you want to continue connecting (yes/no)? yes Warning: Permanently added '11grac1,192.168.199.10' (RSA) to the list of known hosts. oracle@11grac1's password: Now try logging into the machine, with "ssh '11grac1'", and check in: .ssh/authorized_keys to make sure we haven't added extra keys that you weren't expecting. 11grac2-> ssh-copy-id -i .ssh/id_rsa.pub 11grac1 The authenticity of host '11grac1 (192.168.199.10)' can't be established. RSA key fingerprint is cc:d0:c3:de:37:33:a7:cb:91:40:c5:5f:18:07:06:9f. Are you sure you want to continue connecting (yes/no)? yes Warning: Permanently added '11grac1,192.168.199.10' (RSA) to the list of known hosts. oracle@11grac1's password: Now try logging into the machine, with "ssh '11grac1'", and check in: .ssh/authorized_keys to make sure we haven't added extra keys that you weren't expecting. 11grac3-> ssh-copy-id -i .ssh/id_rsa.pub 11grac1 The authenticity of host '11grac1 (192.168.199.10)' can't be established. RSA key fingerprint is cc:d0:c3:de:37:33:a7:cb:91:40:c5:5f:18:07:06:9f. Are you sure you want to continue connecting (yes/no)? yes Warning: Permanently added '11grac1,192.168.199.10' (RSA) to the list of known hosts. oracle@11grac1's password: Now try logging into the machine, with "ssh '11grac1'", and check in: .ssh/authorized_keys to make sure we haven't added extra keys that you weren't expecting.6.3 以上命令会在11grac1的/home/oracle/.ssh目录下生成authorized_keys，将该文件copy到其他两机器上
11grac1-> scp authorized_keys 11grac2:/home/oracle/.ssh/ 11grac1-> scp authorized_keys 11grac3:/home/oracle/.ssh/6.4 重复6.1~6.3步骤，生成grid用户的无密码验证。
7. 验证各节点必须直接是否能无密码登录
ssh 11grac1 date ssh 11grac2 date ssh 11grac3 date ssh 11grac3-priv date ssh 11grac2-priv date ssh 11grac1-priv date ssh 11grac1.localdomain.com date ssh 11grac2.localdomain.com date ssh 11grac3.localdomain.com date ssh 11grac3-priv.localdomain.com date ssh 11grac2-priv.localdomain.com date ssh 11grac1-priv.localdomain.com date8. 挂载iscsi硬盘（每台机器上都执行）
8.1 查找iscsi硬盘
[root@11grac1 scripts]# iscsiadm -m discovery -t sendtargets -p 192.168.199.219 192.168.199.219:3260,1 iqn.2006-01.com.openfiler:fast_recover_area01 192.168.199.219:3260,1 iqn.2006-01.com.openfiler:rac_oradata01 192.168.199.219:3260,1 iqn.2006-01.com.openfiler:rac_ocrdisk03 192.168.199.219:3260,1 iqn.2006-01.com.openfiler:rac_ocrdisk02 192.168.199.219:3260,1 iqn.2006-01.com.openfiler:rac_ocrdisk018.2 设置开机自动挂载iscsi盘
iscsiadm -m node -T iqn.2006-01.com.openfiler:rac_oradata01 -p 192.168.199.219 --op update -n node.startup -v automatic iscsiadm -m node -T iqn.2006-01.com.openfiler:fast_recover_area01 -p 192.168.199.219 --op update -n node.startup -v automatic iscsiadm -m node -T iqn.2006-01.com.openfiler:rac_ocrdisk01 -p 192.168.199.219 --op update -n node.startup -v automatic iscsiadm -m node -T iqn.2006-01.com.openfiler:rac_ocrdisk02 -p 192.168.199.219 --op update -n node.startup -v automatic iscsiadm -m node -T iqn.2006-01.com.openfiler:rac_ocrdisk03 -p 192.168.199.219 --op update -n node.startup -v automatic9.创建asm磁盘
9.1 安装oracleasm-support、oracleasmlib （三台机器都执行）
注：因oracle linux已经将oracleasm内置到内核中了，所以无需安装oracleasm的rpm包。如果使用非oracle Linux操作系统。请按装kmod-oracleasm-2.0.6.rh2-2.el6.x86_64.rpm 包。
[root@11grac2 /]# rpm -ivh oracleasm-support-2.1.8-1.el6.x86_64.rpm warning: oracleasm-support-2.1.8-1.el6.x86_64.rpm: Header V3 RSA/SHA256 Signature, key ID ec551f03: NOKEY Preparing... ########################################### [100%] 1:oracleasm-support ########################################### [100%] [root@11grac2 /]# rpm -ivh oracleasmlib-2.0.4-1.el6.x86_64.rpm warning: oracleasmlib-2.0.4-1.el6.x86_64.rpm: Header V3 RSA/SHA256 Signature, key ID ec551f03: NOKEY Preparing... ########################################### [100%] 1:oracleasmlib ########################################### [100%][root@11grac1 Packages]# oracleasm configure -i Configuring the Oracle ASM library driver. This will configure the on-boot properties of the Oracle ASM library driver. The following questions will determine whether the driver is loaded on boot and what permissions it will have. The current values will be shown in brackets ('[]'). Hitting9.2 将磁盘分区（只需单节点执行）
9.3 创建asm磁盘
[root@11grac1 ~]# ll /dev/disk/by-path/ ip-192.168.199.219:3260-iscsi-iqn.2006-01.com.openfiler:fast_recover_area01-lun-0 -> ../../sde ip-192.168.199.219:3260-iscsi-iqn.2006-01.com.openfiler:fast_recover_area01-lun-0-part1 -> ../../sde1 ip-192.168.199.219:3260-iscsi-iqn.2006-01.com.openfiler:rac_ocrdisk01-lun-0 -> ../../sdb ip-192.168.199.219:3260-iscsi-iqn.2006-01.com.openfiler:rac_ocrdisk01-lun-0-part1 -> ../../sdb1 ip-192.168.199.219:3260-iscsi-iqn.2006-01.com.openfiler:rac_ocrdisk02-lun-0 -> ../../sdd ip-192.168.199.219:3260-iscsi-iqn.2006-01.com.openfiler:rac_ocrdisk02-lun-0-part1 -> ../../sdd1 ip-192.168.199.219:3260-iscsi-iqn.2006-01.com.openfiler:rac_ocrdisk03-lun-0 -> ../../sdc ip-192.168.199.219:3260-iscsi-iqn.2006-01.com.openfiler:rac_ocrdisk03-lun-0-part1 -> ../../sdc1 ip-192.168.199.219:3260-iscsi-iqn.2006-01.com.openfiler:rac_oradata01-lun-0 -> ../../sdf ip-192.168.199.219:3260-iscsi-iqn.2006-01.com.openfiler:rac_oradata01-lun-0-part1 -> ../../sdf1注意以上iscsi磁盘与/dev/sd*的对应关系。
[root@11grac1 ~]# oracleasm createdisk oradata /dev/sdf1 Writing disk header: done Instantiating disk: done [root@11grac1 ~]# oracleasm createdisk fra /dev/sde1 Writing disk header: done Instantiating disk: done [root@11grac1 ~]# oracleasm createdisk ocr01 /dev/sdb1 Writing disk header: done Instantiating disk: done [root@11grac1 ~]# oracleasm createdisk ocr02 /dev/sdd1 Writing disk header: done Instantiating disk: done [root@11grac1 ~]# oracleasm createdisk ocr03 /dev/sdc1查看磁盘
[root@11grac1 ~]# oracleasm listdisks FRA OCR01 OCR02 OCR03 ORADATA [root@11grac1 ~]#在另外两台机器上执行磁盘扫描操作
[root@11grac3 ~]# oracleasm scandisks Reloading disk partitions: done Cleaning any stale ASM disks... Scanning system for ASM disks... Instantiating disk "OCR01" Instantiating disk "OCR03" Instantiating disk "OCR02" Instantiating disk "FRA" Instantiating disk "ORADATA"10. 禁用ntp时间同步服务
因为11g Clusterware中已经提供了时间同步服务，所以需要禁用ntp服务。
[root@11grac3 ~]# cd /etc/ [root@11grac3 etc]# mv ntp.conf ntp.conf.bak感谢各位的阅读！关于“Oracle RAC之环境准备的示例分析”这篇文章就分享到这里了，希望以上内容可以对大家有一定的帮助，让大家可以学到更多知识，如果觉得文章不错，可以把它分享出去让更多的人看到吧！
另外有需要云服务器可以了解下创新互联cdcxhl.cn，海内外云服务器15元起步，三天无理由+7*72小时售后在线，公司持有idc许可证，提供“云服务器、裸金属服务器、高防服务器、香港服务器、美国服务器、虚拟主机、免备案服务器”等云主机租用服务以及企业上云的综合解决方案，具有“安全稳定、简单易用、服务可用性高、性价比高”等特点与优势，专为企业上云打造定制，能够满足用户丰富、多元化的应用场景需求。
分享题目：OracleRAC之环境准备的示例分析-创新互联
转载源于：http://azwzsj.com/article/dsciej.html
