juniper交换机将多个接口加入同时到vlan中-创新互联

[EX/QFX] Wildcard range commands for EX switches

创新互联成立与2013年，是专业互联网技术服务公司，拥有项目成都网站设计、网站制作网站策划，项目实施与项目整合能力。我们以让每一个梦想脱颖而出为使命，1280元寻甸做网站,已为上家服务,为寻甸各地企业和个人服务,联系电话:18980820575

[KB23789] Show KB Properties

SUMMARY:

This article provides information about the wildcard range commands for EX switches.

PROBLEM OR GOAL:

The wildcard range option enables you to configure multiple interface configuration statements by using a single set command; instead of configuring each of them individually for interfaces. The range option with the wildcard command enables you to specify ranges in activate, deactivate, delete, protect, set, show, and unprotect commands.

CAUSE:

SOLUTION:

VLAN output before applying configuration:

{master:0}[edit]

root@dnd-26-plz# run show vlans

Name Tag Interfaces

default ge-0/0/5.0, ge-0/0/6.0, ge-0/0/7.0, ge-0/0/8.0,

ge-0/0/9.0, ge-0/0/11.0, ge-0/0/12.0, ge-0/0/13.0,

ge-0/0/14.0, ge-0/0/15.0, ge-0/0/16.0, ge-0/0/17.0,

ge-0/0/18.0, ge-0/0/19.0, ge-0/0/20.0, ge-0/0/21.0,

ge-0/0/22.0, ge-0/0/23.0, ge-0/0/24.0, ge-0/0/25.0,

ge-0/0/26.0, ge-0/0/27.0, ge-0/0/28.0, ge-0/0/29.0,

ge-0/0/30.0, ge-0/0/31.0, ge-0/0/32.0, ge-0/0/33.0,

ge-0/0/34.0, ge-0/0/35.0, ge-0/0/36.0, ge-0/0/37.0,

ge-0/0/38.0, ge-0/0/39.0, ge-0/0/40.0, ge-0/0/41.0,

ge-0/0/42.0, ge-0/0/43.0, ge-0/0/44.0, ge-0/0/45.0,

ge-0/0/46.0, ge-0/0/47.0

tes110 110 ge-0/0/1.0

test100 100 ge-0/0/0.0

test127 127 ge-0/0/2.0

test254 254 ge-0/0/3.0, ge-0/0/4.0, ge-0/0/10.0

v500 500 None

Command issued to add a group of interfaces to a VLAN:

root@dnd-26-plz# wildcard range set interfaces ge-0/0/[11-13,16,23,45] unit 0 family ethernet-switching vlan members v500

VLAN output after applying the configuration:

{master:0}[edit]

root@dnd-26-plz# run show vlans

Name Tag Interfaces

default ge-0/0/5.0, ge-0/0/6.0, ge-0/0/7.0, ge-0/0/8.0, ge-0/0/9.0, ge-0/0/14.0, ge-0/0/15.0, ge-0/0/17.0, ge-0/0/18.0, ge-0/0/19.0,

ge-0/0/20.0, ge-0/0/21.0, ge-0/0/22.0, ge-0/0/24.0, ge-0/0/25.0, ge-0/0/26.0, ge-0/0/27.0, ge-0/0/28.0, ge-0/0/29.0, ge-0/0/30.0,

ge-0/0/31.0, ge-0/0/32.0, ge-0/0/33.0, ge-0/0/34.0, ge-0/0/35.0, ge-0/0/36.0, ge-0/0/37.0, ge-0/0/38.0, ge-0/0/39.0, ge-0/0/40.0,

ge-0/0/41.0, ge-0/0/42.0, ge-0/0/43.0, ge-0/0/44.0, ge-0/0/46.0, ge-0/0/47.0

tes110 110 ge-0/0/1.0

test100 100 ge-0/0/0.0

test127 127 ge-0/0/2.0

test254 254 ge-0/0/3.0, ge-0/0/4.0, ge-0/0/10.0

v500 500 ge-0/0/11.0, ge-0/0/12.0, ge-0/0/13.0, ge-0/0/16.0, ge-0/0/23.0, ge-0/0/45.0

//下面的配置效果和上面的一样

The end result is that the same configuration is applied to all of the above interfaces:

root@dnd-26-plz# set interfaces ge-0/0/11 unit 0 family ethernet-switching vlan members v500

root@dnd-26-plz# set interfaces ge-0/0/12 unit 0 family ethernet-switching vlan members v500

root@dnd-26-plz# set interfaces ge-0/0/13 unit 0 family ethernet-switching vlan members v500

root@dnd-26-plz# set interfaces ge-0/0/16 unit 0 family ethernet-switching vlan members v500

root@dnd-26-plz# set interfaces ge-0/0/23 unit 0 family ethernet-switching vlan members v500

root@dnd-26-plz# set interfaces ge-0/0/45 unit 0 family ethernet-switching vlan members v500

The same can be used for the following purposes - active, deactivate, delete, protect, set, show, and unprotect configuration commands.

This new option is documented in the Release Notes (including the link). For more information, refer to the following configuration example:

http://www.juniper.net/techpubs/en_US/junos/topics/example/junos-cli-wildcard-range-configuring.html

PURPOSE:

Configuration

Implementation

juniper交换机将多个接口加入同时到vlan中-创新互联

其他资讯